GE SmartWater XWFE Refrigerator Water Filter
Model: XWFE / Part: #189242
- Free Returns
- 100% Compatibility Guarantee
- Compatibility guaranteed! Free return shipping and 100% money back if there are any issues.
FREQUENTLY BOUGHT TOGETHER
Filter Bypass for GE XWF / XWFE
The factory original GE SmartWater XWF Filter is used in refrigerators by GE. The XWFE filter creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice. The XWF is used in bottom freezer and side-by-side refrigerators. The XWFE water filter cartridge holder is located in the back upper-right corner of the fresh food refrigerator compartment or in the left door.
Features:
- Original OEM product
- Easy installation and operation
- Certified to reduce chlorine and chloramines taste and odor, for better tasting water and ice
- Certified to reduce BPA, chlorine-resistant cysts, lead, select pharmaceuticals and 50 other impurities
- Helps reduce contaminants found in tap water and improves its quality
- The system has been tested according to NSF/ANSI Standards 42, 53, and 401 for the reduction of the substances listed on the performance data sheet.
- Compatability guaranteed! Free return shipping and 100% money back if there are any issues.
Compatible Part Numbers
How to install
INSTALLING THE FILTER IN A BOTTOM FREEZER REFRIGERATOR
1. Open the filter cartridge housing by squeezing the 2 front tabs and gently pulling down.
2. Line up the ports on the filter with the ports on the filter cartridge holder, and gently insert the filter.
3. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. As you turn the filter, it will automatically
adjust itself into position. The filter will move about a ¼ turn or 90 degrees, until the arrow on the filter aligns with the arrow on the filter cartridge holder.
4. Slowly push the filter up into the clips.
5. Close the filter cartridge housing by gently pushing the lid upwards until the tabs lock into place.
6. Continue following instructions shown in Purging the Filter and Reset Filter Change Indicator Sections.
INSTALLING THE FILTER IN A SIDE BY SIDE REFRIGERATOR
1. Line up the arrow on the filter with the arrow on the filter cartridge holder. Gently push the top of the new filter up inside the holder.
2. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. As you turn the filter, it will automatically raise itself into position. The filter will move about a ¼ turn or 90 degrees.
3. Continue following instructions shown in Purging the Filter and Reset Filter Change Indicator Sections.
INSTALLING THE FILTER IN A MULTI-DOOR BOTTOM FREEZER REFRIGERATOR
1. Open the filter cartridge housing by pulling the door open.
2. Line up the ports on the filter with the ports on the filter cartridge holder, and gently insert the filter.
3. Slowly turn the filter to the right until it stops. DO NOT OVERTIGHTEN. As you turn the filter, it will automatically adjust itself into position. The filter will move about a ¼ turn or 90 degrees, until the filter cannot be turned, and the label faces outward.
4. Slowly push the filter up into the clips.
5. Close the filter cartridge housing by gently pushing the door closed until the tabs lock into place.
6. Continue following instructions shown in Purging the Filter and Reset Filter Change Indicator Sections.