Whirlpool EDR2RXD1 Refrigerator Water Filter (Filter2)
Model: EDR2RXD1 / Part: #180621
- Free Returns
- 100% Compatibility Guarantee
- Compatibility guaranteed! Free return shipping and 100% money back if there are any issues.
The factory original Whirlpool EveryDrop EDR2RXD1 (AKA FILTER 2) takes over for the W10413645A filter and is used in refrigerators by Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, Kenmore and others. The Whirlpool EDR2RXD1 filter creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice.
Features:
- Original OEM product
- Easy installation and operation
- Helps reduce chlorine taste and odor
- Helps reduce contaminants found in tap water and improves its quality
- Tested by NSF International against Standard 42 for the reduction of chlorine taste and odor and particulate
- Tested by NSF International against Standard 53 for the reduction of lead, cysts, turbidity and other chemicals and impurities
- Replaces the popular W10413645A
- Compatability guaranteed! Free return shipping and 100% money back if there are any issues.
Compatible Part Numbers
46 9082
46-9082
46-9903
46-9924
469082
9082
BLZ-27899
EDR2RXD1
Filter 2
Filter2
GRE1002
KAD2
KAD2RXD1
NMS02
P6RFWB2
P6RKFB2
P9RFWB2L
P9WB2L
SW36
W10238154
w10413645a
WF645
How to install
How To Install The W10413645A Filter:
- Locate the filter door in the right side of the refrigerator ceiling.
- Press in up on the filter cover door to release the door latch. The door will drop down.
- If you are replacing a filter rotation the used filter counter clockwise to remove it from the filter head. Note: there may be some water in the filter and some spilling may occur.
- Take the new water filter out of the packaging and remove the cap. Be sure the O-rings are still in place after the cover is removed.
- Align the arrow on the water filter label with the cutout notch in the filter head and insert the filter.
- Turn the filter clockwise until it locks into the housing.
- Lift the filter up into the compartment. Close the filter door completely.
- Reduce water spurts by flushing air from the system. Run water continuously for 4 gallons (approximately 5 minutes) through the dispenser until water runs steady. Additional flushing may be required in some households where water is of poor quality.